Your brakes should feel right every time you drive. If they don’t, it’s best to get them checked promptly. At Medway Vehicle Services, we help drivers across Medway with clear, straightforward brake repairs and replacements.
First, we inspect, then we explain, and we only fix the fault with your approval. From brake pads and discs to brake fluid changes, ABS warning lights, and parking brake issues, our local team keeps the process simple, honest, and safe.
Not sure if it’s time to get your brakes checked? Here are some common warning signs.
Squeaking, grinding, or scraping noises
Warning light showing on your dashboard
Car pulling to one side while braking
Brake pedal feels soft, spongy, or unresponsive
Longer stopping distances
If you notice any of these signs, don’t wait, get your brakes inspected as soon as possible.
Step 1: Tell us what you’ve noticed
Share the symptoms you’ve noticed, such as noises, a soft pedal, pulling, vibration or a warning light, and when they occur. Your notes help us focus the check quickly. Bring any recent service records or warning messages if you have them.
Step 2: Road test and visual check
We take a short drive to feel the fault, then inspect pads, discs, callipers, hoses, and lines to spot obvious wear, leaks, or sticking parts. We also note any related issues that could affect braking performance.
Step 3: Measure and fluid assessment
We record pad thickness, check disc wear and condition, and assess brake fluid level and condition. This confirms whether it’s pads, discs, fluid or something deeper. We log these measurements so you can see how they compare to safe limits.
Step 4: Diagnostics if a light is on
If the brake or ABS warning light is on, we scan the system to read fault codes and live sensor data. This removes guesswork around ABS sensors, rings, and wiring. We then explain what the codes mean and what needs attention now versus later.
Step 5: Plain-English explanation and quote
We show what we found in photos if helpful, then explain your options and give you a clear price. No work starts without your approval. You’ll know the parts, labou,r and timescales before you decide.
Step 6: Repair or replacement
With your go-ahead, we fit suitable parts (pads, discs, hoses, callipers as required), torque everything to specification, and follow correct fitting and bedding procedures. We use quality, manufacturer-appropriate parts for a reliable result.
Step 7: Bleed, test, and quality check
We bleed the brake system where needed, confirm a firm pedal, and then carry out a careful road test to check smooth, even braking and straight stops. We only sign off once braking is consistent and any related warning lights are cleared.
Step 8: Handover and simple aftercare
We review the work done, share any notes, and give you easy aftercare tips such as gentle braking while new pads and discs bed in, so you leave confident and safe. We’ll also advise when to return for a quick recheck if you have any concerns during bedding-in.
Brake fluid transmits force through the hydraulic system. Over time, moisture can build up and lower its boiling point, which can make the pedal feel soft and, in some conditions, increase stopping distance.
Our service bleeds the system to remove old fluid and air, refills with the correct specification fluid for your vehicle, and finishes with a careful road test. The goal is a firm, predictable pedal and consistent braking you can trust.
Drivers choose us for clear quotes, friendly service, and plain-English advice. We use modern diagnostic tools to scan, measure, and test your braking system, so you get an accurate fix without guesswork.
We repair only what’s needed and explain every step, so you can make decisions with confidence. If you need more than brakes, we also help with tyres, clutches, batteries, and other repairs, all in one place.
Listen and feel for changes. A squeal or grind is common when pads are worn. If the car pulls, shakes, or the pedal feels soft, book a check. We’ll measure the brake parts and show you what we find so you can choose with confidence.
A brake or ABS warning light means the system needs attention. If it’s a red brake warning (or the pedal feels soft, the car pulls, or stopping distances increase), don’t drive that can indicate a hydraulic issue or low fluid.
Every repair starts with inspection and measurement. We replace worn or damaged parts, bleed the fluid where needed, and finish with a controlled road test. You’ll get a clear, simple handover so you know what was done and why.
We can bleed and refill the system using the correct specification fluid for your vehicle. First we assess the fluid’s level and condition, then remove old fluid and any trapped air, refill, and bleed the system properly (including ABS-equipped systems where applicable).
Tell us the symptoms, and we’ll check and explain the fix. With your approval, we will complete the repair and road test the car so you can leave with confidence. Request a brake quote or call to book today. For an overview of our brake service, visit Brake Repairs & Replacement.
Phone: 01634 510 780
Email: bookings@medwayvehicleservices.
co.uk
Unit 3 Cliffe Yard, Anthonys Way, Medway City Estate, Rochester, Kent, ME2 4DY
